General

:

Tipper body is used to transport construction material and wastes. It has a hydraulic cylinder for unloading. The dimensions of the tipper body depend on the customer’s requirement, the payload capacity, as well as the size of the chassis.

Capacity

:

12 cum to 20 cum

Material

:

ASTM A36 or Equivalent

Thickness

Bottom, Rear & Sides – 6 mm

Construction

:

The Floor Plate is reinforced by cross-members located longitudinally at equal and suitable intervals. The Side Plates are reinforced from the outside by vertical and horizontal stiffeners. The Rear Door is ‘Top-hinge’ type and strengthened by vertical and horizontal stiffeners.

Suitable sub-frame, made out of box sections, shall be provided.

Suitable canopy shall be provided on the top front-end of tipper body

Tripping

:

Front mounted telescopic cylinder with suitable hydraulic wet-kit shall be provided. (BINOTTO/ HYVA or equivalent)

Locking Mechanism

:

Locking mechanism is provided for the rear door, to open automatically while tipping and lock it on retraction.

Electrical

:

Side Indicators (4 Nos./ side) with necessary wiring.

Painting

:

Internal: Nil

External: One coat of primer followed by synthetic enamel painting system to white colour or as per the customer’s choice.

Standard Accessories

:
  • Rear bumper, as per traffic regulations
  • Mudguard with Mud flaps
  • Access ladder, on driver’s side
  • Tool box
  • Water Tank

 

Optionals At Extra Cost

:
  • Higher thickness bottom & sides
  • High Tensile plates
  • Tarpaulin
  • Wheel locks