Body Capacity


14- 18 cum

Hopper Capacity


1.5 cum (minimum)

Refuse Density


450 kg/cum

Compaction Ratio


The compaction ratio varies between 3:1 and 6:1, according to the characteristic of the garbage.



Complete welded construction with curved or trapezoid sides.



Floor – 4 mm

Sides – 3 mm

Roof – 3 mm



A 36 or Equivalent

Bin Handling

  • Suitable to lift 800L & 1100L containers
  • Suitable to lift 240L containers

Operation & Control


Tailgate and Ejector controls are located in the front part of the body.

All devices for loading control are mounted on the tailgate right side.

The system can be operated electrically (automatically) via buttons as well as manual (mechanically) via handle/ lever.

RED colour Emergency-Stop-Buttons on both sides, for rescue activity.

Hydaulic System


Suitable hydraulic gear pump, driven by PTO of the vehicle

Working Pressure : 170 to 200 bar

Oil Reservoir : 120 to 150 Litre. with filler breather and level gauge

Different cylinders are used on tail gate and body

  • For tailgate operation to execute slide, sweep and pack motion
  • For bin handling
  • For tailgate and ejector plate operation.



Hydraulically operated winch mechanism, suitable for lifting 3 metal containers up to 5 metre height



Electrical system is separate from the original circuitry of the truck

Side Indicators (4 Nos./ side), Beacon Lamps and necessary wiring.

All electrical wiring behind the cab is routed through conduit pipes.



Grit-blasted followed by one coat of primer and enamel painting system, colour to customer choice.

Truck Requirements


Payload Capacity: ~12.5 T (14 cum) to 14 T (18 cum)

PTO and controls: To be supplied with direct mount PTO

PTO Torque: 450 to 500 N-m

Standard Accessories

  • Flood Light on top of the Hopper – 1 No.
  • Foldable type rear foot boards on both sides
  • Mudguard with Mud flaps
  • Tool Box – 1 no
  • Rotating Beacon -1 no