Jetting Tanker is used to clear blocked sewage lines by means of a water jet from high-pressure plunger pump. A suitable chassis (to operate the pump) with necessary brake system in parked condition is provided by the customer.



3000 IG to 5000 IG



Cylindrical cross section with welded dished ends on both ends, internally reinforced with flanged baffles, bolted to welded channels.

Material: A36 or Equivalent.

Thickness: Shell – 6 mm, Dish – 8 mm

Connections / Openings


20” – Manhole, quick opening type for filling and 2” Vent

2” – Discharge through pump and hose reel with bypass

Pump / Hose Reel


Split PTO will be installed on the drive shaft to operate Jetting pump and hydraulic pump for hose reel.

  • High pressure pump, 260 lpm @ 155 bar (COMET/ PRATISSOLI or equivalent make)
  • Hydraulically operated 180° swivel hose reel with 1” x 100m high pressure hose with retro nozzles 15°+35° (general cleaning and degreasing), 25° and 35°.
  • Manually operated hose reel with ½” x 15m hose with pressure wash gun

Control Panel

Instrumentation control panel consists of

  • Pump Emergency Stop
  • Engine Throttle switch
  • High-pressure water gauge
  • Pressure control valve
  • Pump running indicators
  • Hose reel lock switch

Inspection & Certification


Visual Examination of welds. Certificate of Manufacturing shall be provided.



Tank is tested pneumatically at 6 psig



Side Indicators (4 Nos./ side), Beacon Lamps and necessary wiring.



Internal: Grit blasted followed by epoxy painting system

External: Grit blasted followed by synthetic enamel painting system with under-chassis in Black colour. The tank is painted in white colour or as per the customer’s choice.